Foundationarmor Bewertungen 148

Purchased the AR500 for our new garage concrete floors. Followed AR's instructions and the results were great! I am glad I applied this sealer before we used the garage! The sealer does protect the floor from water, dirt and oil stain and makes it easy to sweep and clean. (Apply 2 coats at least.) The 5 gallon is plenty for a 500 sq ft space. I totally recommend this product.
Note, the odor is strong so I suggest you open the can and transfer the contents outdoor in the open air. And wear a protective mask when you apply.

I purchased 2, five gallon drums of your armor sealer.
10 gallons got my pool deck, driveway, and my sidewalk covered.
Nice finish and easy job with a roller.
I definitely would recommend this product.
Purchased through Amazon.

I bought and used the 5 Gal. SX5000WB product to do my pebble pool deck and it was easy to apply with a pump sprayer. I would highly recommend this product.

I purchased five gallons. Of the Armor AR350 to coat our driveway and side walks. The material had no type of settling. Application was very easy using a roller, and it dried very well, leaving a nice wet look on the driveway. I will definitely use it again.

Hello, wanted to commend you're product Foundation Armor AR 350 Wet Look solvent paver sealer. I applied to an existing paver project I installed in 2011. Pavers were looking dull and had lost coloration and the AR 350 sealant transformed dull, faded concrete pavers to a beautiful just rained appearance. I had originally applied a water based sealant that was satisfying at the time, but wear and sun had really faded them. Took a chance on you're product, didn't think I waould like the wet look and love it!
shipping was fast, free delivery, and arrived two days before estimated delivery date, Great job.

First time using AR350. Applied two coats on my stamped concrete pool deck. It brought it back to life. Easy to apply. I added Armor non slip additive. It looks great.

We are contractors in the Dallas area and we had a project that was a 1463 ft.² stamped concrete five-year-old driveway that required some repair and reseal. After prepping the driveway by using a power washer with a 15” surface cleaner, twice, allowing it to dry overnight, blowing the driveway in the morning we were able to start the touchups. The stamp chipped in various areas due to the cars backing in and out of the driveway. Once the recoloring was done we applied foundation armor AR 350. We purchased two 5 gallon buckets but ended up only using 7 gallons With 3 gallons left over for our next project. We had a nice Chapin extreme pro 3.5 gallon sprayer and useD the smaller fan tip that came with the sprayer. Note: I’d probably buy a cone shaped tip on our next project to control the amount of product more effectively. That was something I learned recently.

The temperature in Dallas has been running in the 90s (June 11) so we waited for a day that was under 90. We sprayed the first coat in the morning while it was 75° and waited to do the next coat at 8:30 at night. Overnight temperatures will be in the 60s which would allow this to cure more effectively. The product dries quickly and you can literally walk on it within 30 to 45 minutes. We asked the homeowner to not have foot traffic on it for 24 hours and to be safe 72 hours for vehicles,

The job turned out just beautifully and now the homeowner has hired us to apply WL550 on the travertine pool and outdoor kitchen area. Remember that travertine is a natural stone and requires it to breathe and therefore cannot use A.R. 350 as a sealer. Another 1300 ft.² project! This time we’re going to only do one coat because it’s not that porous.

Many customers saw the driveway and it has resulted in three new jobs for us. This products is outstanding, easy to use, recommended by the professionals, and is now part of our portfolio of services offered to our customers in Dallas.

Expertly packaged product, I bought it from Amazon and left a review there also. Based on other peoples reviews I think this is going to work out fantastic

We have 1500 sq. feet of Travertine around our pool, which had to be replaced after about 6 months of having our pool built, it was dissolving away. Now that the old has tiles have been replaced, we wanted something that would help it stay nice and not dissolve away again. After some research I found this Armor WL550, after talking with them we ordered a small amount to try on a tile we saved incase some needed replacing later on, it looked great so after talking with a few people that actually sealed tile professionally we decided to try it our selves. We are very happy with it so happy we decided to seal the cement next to the travertine it's about 800 sq. feet everything came out wonderful. I would definitely recommend it to protect and make all the wonderful colors of the stones come out. When it's time to reseal we will be getting more. Thank You for your great product and customer service. Crystal and Russ

I USED THIS ON MY NEW DRIVEWAY WORKS GOOD 2 COATS DID A NICE JOB !

I have used both AR350 Satin Sheen / Wet Look and SX5000 WB on various projects. Both are excellent products and easy to work with. I would also like to highlight the customer service I received when contacting the Foundation Armor Company. All my questions were answered professionally and in detailed. Great Company / Great Service.

These guys really know their business and are very helpful. Had a contractor that gave me wrong instructions on aftercare for my pigment mixed in the truck concrete porch and the sealer did not work. Foundation armor helped me with a solution

Recently purchase two 5 gal AR350 Solvent Based Acrylic Wet look Concrete sealer and paver sealer. Followed the instructions as stated for preparing the surface and applying this sealer. I used the spray and roll method and the final finished looks great. This is a great product and worth the money spent.

Technical support was fantastic, they were there the several times i called, answered all my questions throughout the application,and the SX5000 WB, went on as expected, i used a 2 gal pump sprayer, it dried natural looking to the pavers i used it on, now it is just seeing how long it lasts.

These guys are knowledgeable, accessible, and responsive. Hard to find that in a company these days. The product (SX 5000WB) went on as advertised and the only thing left to determine is how long it will last on CMU split face walls in the hot Southern California climate. If it lasts the 5 plus years as advertised, I wont go anywhere else. It's a pleasure to do business with this company.

I purchased Armor AR350 Wet Look/Satan Gloss Acrylic Sealer (ultra low VOC) to seal and brighten up my 20 year old faded out paver stone patio and exposed aggregate concrete sidewalk. I applied two coats as per instructions and am extremely satisfied with the results.The paver stones and concrete look glossy WET, new and attractive now. I used a 4 inch wide paint brush to apply the first coat to make sure the sealer penetrated the spaces between the pavers and then a sponge roller to apply the second. The benefits, suggested applications and technical information provided by Foundation Armor was very helpful and "spot on" accurate! Because of the great results I plan to use only this product in the future. (Oh yes, about the fume smell...No Problem... it is not that bad. It goes away after the sealer dries). I highly recommend it! It is a winner! Sincerely, Dan G.

I purchased 5 gallon of Armor WL 550 Matte Wet Look Enhancer Sealer for newly installed paver.
Great product. Finished product meet my expectation.
Great customer service

I purchased a 5 gallon pail of Armor SX5000 on a Friday and it arrived the following Tuesday. It was applied on a new concrete drive after allowing to cure. It went on fairly easy using a roller. The concrete seemed to suck this stuff in. After 36 hours we had a torrential downpour and the water beaded up like you wouldn't believe. The 1 pail was enough to do an 18x20 square ft. driveway plus a 3x10 sidewalk.Unfortunately I missed a section of the drive and used what was left to put a second coat on another section. But in the rainstorm, it was easy to see what was coated and what wasn't and I will be getting more to finish the job.

Great advice for our sand stones that were weathering through all seasons in Denver, CO. We got exactly what we needed. We will be purchasing more of that treatment as well as something to cover our patio! Highly recommend !!!

I am extremely happy with the sealer I purchased from Foundation Armor. I used AX25 on concrete roof tiles. The color is rejuvenated and water beads on the surface of the tiles. Foundation Armors' website was easy to use and provided all the technical information I needed. Time will tell how happy I am ultimately, after one winter so far so good. I was looking for a sealer that didn't just lay on top of the surface and the siloxane infused sealer seemed to be what I was looking for.