Bewertungen zu Bonda G4 Pond Sealer Clear

Bonda G4 Pond Sealer Clear is a moisture-cured polyurethane, which forms a non-porous seal on concrete, brick, or porous stone. G4 uses the moisture in the air and substrate to cure or harden. It can be applied onto slightly damp substrates. However, it is important that the substrate is sufficiently dry to be porous to enable the first coat of G4 to bond and obtain a mechanical grip. G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C. G4 seals out lime. Quick Links - Click To Jump To Section: Features & Benefits Product Specifications Application Health and Safety Features & Benefits Deep bonding plastic coating for concrete rendered ponds Seals concrete floors Quick and easy to apply No primer needed Can be used at low temperatures Product Specifications Technical Data Bonda G4 Pond Sealer Clear Coats G4 Clear 3 coats. G4 Colours needs 2 coats of G4 Clear, then 2 coats of G4 Colours Drying Time Can be walked upon in 60-90 minutes Re-coating Time Recoat in 60-90 minutes between coats. Do not allow 4 hours to elapse between coats Application Temperature G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C Coverage 550g/sq.m Maintenance Not applicable Compatibility Compatible with G4 Thinners Settlement Shake well before use Shelf Life Many years if suitably stored unopened in original container. NOTE: This is a moisture-hardened product so storage life of opened tins is limited Application Ensure cement render is clean, dry, and porous – highly trowelled surfaces are not advised Repair cracks and damaged areas Apply the first coat by brush, avoid thick coats, the subsequent coats can be thinned and sprayed Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable Health and Safety Flammable Irritant Avoid contact with eyes and skin Wear protective gloves and eye protection In case of contact with eyes, immediately rinse with plenty of water and seek medical attention After contact with skin, wash immediately with soap and water or a suitable skin cleanser Keep out of reach of children Avoid ignition sources Do not spray Do not inhale vapour