Bewertungen zu Cell Phone EMF Protection + Radiation Blocking Pouch

Description Store Your Phone, Shield Your Body Your phone does not stop transmitting when you stop using it. Cellular, WiFi, Bluetooth, and 5G signals radiate continuously from the device whether the screen is on or off, in your pocket or your bag. The closer the phone sits to your body, the higher the exposure. The DefenderShield® EMF Blocking Pouch gives your phone a place to rest where the emissions are reduced between the device and your body. The back panel is lined with Ultra Armor® Shielding Technology — a shielding layer that blocks up to 99% of wireless RF radiation up to 110 GHz . That covers all three 5G bands, 4G LTE, WiFi, Bluetooth, GPS, NFC, and RFID. Slide the phone in, keep the shielded back facing your body, and the pouch does the rest. Your phone stays accessible while the shielded back absorbs what would otherwise radiate directly into your body. Cellular signal, WiFi, and Bluetooth remain fully functional. Note: This product uses Ultra Armor® (without the “+”). It blocks wireless RF radiation but does not include ELF battery shielding. For ELF coverage, see DefenderShield’s Ultra Armor+® wallet cases and phone shields. Hands-Free Carry, Hands-Free Calls The pouch is built from durable neoprene . A detachable cross-body strap (adjustable from 26.5” to 50.5”) lets you wear the pouch over your shoulder or across your chest. A VELCRO® belt loop on the back attaches to any belt or bag strap. A magnetic full-flap closure keeps the phone hidden and secure while allowing one-handed access. A pen loop and a front pocket hold small items like a card, an ID, or a stylus alongside the phone. For hands-free calls, place the phone upside down in the pouch on speakerphone (the microphone faces out the top), or connect DefenderShield Air Tube Earbuds for private conversations while the phone stays shielded inside the pouch. Key Features 🛡️ Ultra Armor® — RF Shielding Up to 110 GHz The back panel blocks up to 99% of RF radiation across the full wireless spectrum, including all three 5G bands, 4G LTE, WiFi, Bluetooth, GPS, NFC, and RFID. The shielding faces your body; the phone’s antenna communicates from the unshielded front and sides. This is Ultra Armor® (RF coverage). For RF + ELF battery coverage, see products with the Ultra Armor+® designation. 📱 Cross-Body Strap + Belt Loop — Two Ways to Wear Clip the detachable strap for cross-body or over-the-shoulder carry (adjustable 26.5”–50.5”). Or skip the strap and loop the pouch onto your belt or bag with the built-in VELCRO® attachment. Either way, make sure the shielded back stays between the phone and your body. 🔒 Magnetic Flap Closure A full-flap magnetic closure keeps the phone secure and hidden. One-handed access — flip the flap, pull the phone, flip it back. No zippers, no snaps, no fumbling. 📡 Phone Stays Fully Connected Inside the Pouch Calls, texts, and notifications come through normally while the phone is inside the pouch. The shielding faces your body only — the front and sides remain unshielded, so the antenna communicates freely. No missed calls, no dropped WiFi, no Bluetooth disconnect. If you want no signal access, check out the DefenderShield Cell Phone Faraday Crossbody Pouch. 🎙️ Hands-Free Call Options Speakerphone: place the phone upside down in the pouch so the microphone faces out the top opening. Talk freely while the phone stays shielded. Private calls: connect Air Tube Earbuds, accept calls from the audio controller, and keep the phone inside the pouch the entire time. 🧪 Durable Neoprene Build Neoprene — the same material used in wetsuits — provides flexibility, water resistance, and long-term durability. The pouch does not stiffen, crack, or degrade with daily use the way rigid cases can. It weighs 2.8 oz and fits most smartphones. How to Use Getting Set Up 1. Attach the strap or belt loop. Clip the detachable cross-body strap to the side rings for shoulder or chest carry, or thread the VELCRO® loop on the back through a belt or bag strap. Both options keep the shielded back facing your body. 2. Slide the phone in. Open the magnetic flap, insert the phone, and close the flap. The phone sits against the shielded back panel automatically to block direct body contact with EMF emissions. 3. Use the front pocket and pen loop. Slip a card, ID, or stylus into the front pocket or pen loop for quick access alongside the phone. For Maximum RF Reduction • Keep the shielded back facing your body. On a belt: the back of the pouch should be against your hip. Cross-body: the back should be against your torso. In a bag: the back of the pouch should be closest to your body. The shielding is directional — it blocks what radiates from the phone toward you through the back panel. • The front, top, and sides are not shielded. If you wear the pouch with the front facing your body, the shielding faces outward and provides no body protection. • For hands-free speakerphone calls: place the phone upside down in the pouch. Wear the pouch around your neck with the crossbody strap shortened. The phone should be 6-8 inches from your mouth, with the microphone facing out the top opening. Don’t close the magnetic cover and instead tuck it in behind your phone — the phone stays inside and the shielded back stays between the device and your body. The speaker in the bag should be able to be heard in normal environments through the neoprene bag fabric. • For private hands-free calls : connect DefenderShield Air Tube Earbuds to your phone, place the phone in the pouch, and accept calls from the earbud controller. Talk and listen through the earbuds while the phone stays shielded inside the pouch. Care Instructions • Wipe the neoprene exterior with a damp cloth. Allow to air dry. • Do not machine wash/dry or submerge the pouch — the shielding layer can be damaged. • Keep the magnetic closure free of metal debris for a reliable seal. • Store flat when not in use to preserve the shape of the neoprene. Specifications EMF Protection Specifications Specification Detail Shielding Technology Ultra Armor® Shielding Technology (RF coverage) Shielding Effectiveness Up to 99% of wireless RF radiation blocked directionally Frequency Range Up to 110 GHz (300 Hz – 110 GHz) RF Protocols Blocked WiFi (2.4 GHz & 5 GHz) · Bluetooth · Cellular (1G–5G) · GPS · NFC · RFID · 5G low-band, mid-band & high-band mmWave ELF Shielding Not included — Ultra Armor® does not cover ELF (see Ultra Armor+® products) Shielding Location Back panel only — must face your body Device Connectivity Fully functional — calls, texts, notifications unaffected Testing & Verification FCC-accredited lab tested for EMF shielding performance Physical Specifications Specification Detail Outer Dimensions 8.00 × 5.00 × 0.40 in Inner Dimensions 7.00 × 5.00 × 0.40 in Weight 2.8 oz Strap Length 26.5” to 50.5” (adjustable, detachable) Material Neoprene Closure Magnetic full-flap Belt Attachment VELCRO® loop on back Front Pocket Stretchy mesh holds cards, IDs, or small items Pen Loop Built in on side Compatibility Most smartphones that fit within 7” × 5” inner dimensions HSA / FSA Eligible Yes — see if you qualify at checkout Warranty 1-year manufacturer warranty Video Watch the product demo — see how to wear the EMF Pouch on a belt and cross-body, how the shielded back positions against your body, and how to make hands-free calls with the phone inside the pouch.